ISO 15230-1-2021 PDF

ISO 15230-1-2021 PDF

Mechanical vibration and shock-Coupling forces at the man-machine interface for hand-transmitted vibration-Part 1: Measurement and evaluation

$96.50 $193.00 -50%
Product Code: ISO 15230-1
Stock In Stock
Edition: 1ST
Published: 08/2021
Number of Pages: 34
File Size: 1 file, 1 Byte

Available Options

Product Description

Mechanical vibration and shock — Coupling forces at the man-machine interface for hand-transmitted vibration — Part 1: Measurement and evaluation

Introduction: The coupling forces between the hand-arm system and a hand-held or hand-guided machine during its use are very important factors. Although these forces are of interest for both vibrating and non- vibrating machines, the primary focus of this document is to provide a set of descriptions of the forces at the man-machine interface that are primarily for the hand-arm system in contact with a vibrating surface of a machine. The coupling forces involved in the operation of a vibrating machine generally consist of two different components. The first component is the force applied by the hand-arm system, which is used to provide necessary control and guidance of the machine and to achieve desired productivity. This quasi-static force (frequency below 5 Hz) is the focus of this document. The second component is the biodynamic force which results from the biodynamic response of the hand-arm system to a vibration. Different couplings of the hand to a vibrating surface can affect the human body in two different ways: a) The relationship between the measured handle vibration and the resultant transmission of vibration to the hand-arm system might be altered. This alteration modifies the exposure and the vibration effect to the hand-arm system. b) The coupling can result in a synergistic effect with vibration exposure which affects anatomical structures, such as the vascular system, nerves, joints, tendons. Currently, many machine situations have been modelled by many basic physiological s

Scope: This document describes the coupling parameters between the hands of a machine operator and a vibrating surface of the machine. The coupling between the hand and the vibrating surface can be described using different parameters and component parts of these parameters: — force parameters, such as push, pull and grip; — parameters such as pressure exerted on skin. In addition, Annexes A, B, C, D and E provide guidelines for measuring procedures, the measurement of the force and pressure parameters, and information on the requirements for measuring instrumentation, as well as a calibration method. This document does not deal with forces which act tangentially to the hand.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15230-1-2021 PDF

ISO 15230-1-2021 PDF

$96.50 $193.00