ISO 15610-2024 PDF

ISO 15610-2024 PDF

Specification and qualification of welding procedures for metallic materials-Qualification based on tested welding consumables

$31.50 $63.00 -50%
Product Code: ISO 15610
Stock In Stock
Edition: 3.
Published: 03/2024
Number of Pages: 14
File Size: 1 file, 973 Bytes

Available Options

Product Description

Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables

Introduction: This document is a part of a group of standards dealing with specification and qualification of welding procedures, details of which are given in ISO 15607:2019, Annex A. In ISO 15607, one of the methods for the qualification of welding procedures is based on tested welding consumable usage data. © ISO 2024 – All rights reserved

Scope: This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607. In addition, it gives the range of qualification. This document is applicable to the welding processes according to Table 1. Table 1 — Applicable welding processes Process number according to ISO 4063:2023 Welding process Manual metal arc welding Self-shielded tubular cored arc welding Submerged arc welding with solid wire electrode MIG welding with solid wire electrode MIG welding with flux cored electrode MIG welding with metal cored electrode MAG welding with solid wire electrode MAG welding with flux cored electrode MAG welding with metal cored electrode TIG welding with solid filler material Plasma arc welding Oxyacetylene welding Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service. This document is limited to: — butt welds and fillet welds in material of thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2); — fillet welds with throat thickness a ≥ 1 mm. This document is not applicable when any of the following is specified for the welded joint: a) hardness; b) impact properties; c) preheating; d) controlled heat input; © ISO 2024 – All rights reserved ISO 15610:2024(en) e) interpass temperature; f) post-weld heat treatment. The use of this document can also be restricted by an application standard, specification or other documents. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/TR 15608, Welding — Guidelines for a metallic materials grouping system ISO 15609-1, Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15610-2024 PDF

ISO 15610-2024 PDF

$31.50 $63.00