Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding
Introduction: All new welding procedure tests are intended to be carried out in accordance with this document. However, this document does not invalidate previous welding procedure tests made to former national standards or specifications or previous editions of this document. Where additional tests have to be carried out to make a qualification technically equivalent, these should be done on a test piece which is made in accordance with this document. Specification and qualification of WPSs that were made in accordance with previous editions of this document can be used for any application for which the current edition is specified. In this case, the ranges of qualification of previous editions remain applicable. It is possible to create a new welding procedure qualification record (WPQR) range of qualification according to this edition based on an existing qualified WPQR, provided the technical intent of the testing requirements of this document have been satisfied. © ISO 2025 – All rights reserved
Scope: This document specifies requirements for qualification testing of welding procedure specifications (WPSs) for electron or laser beam welding. This document applies to metallic materials, irrespective of the shape of the parts, their thicknesses, the manufacturing method (e.g. rolling, forging, casting, sintering) or their heat treatment. It covers both the production of new parts and repair work.