UV-C devices — Measurement of the output of a UV-C lamp
Introduction: The First World Health Organization (WHO) Global Conference on Air Pollution and Health took place at WHO headquarters in Geneva, Switzerland from 30 October to 1 November 2018. The conference participants considered the scientific evidence on air pollution and health and emphasized: Air pollution — both ambient and household — is estimated to cause 7 million deaths per year; 5,6 million deaths are from noncommunicable diseases and 1,5 million from pneumonia. There is an urgent need to scale up the global response to prevent diseases and deaths (available at http://www.who.int/phe/ news/clean-air-for-health/en/). Research shows that indoor air pollution can be 2 to 5 times greater than outdoor pollution and under particular circumstances; it can be up to 100 times. Since people generally spend more than 80 % to 90 % of our time indoors, the quality of indoor air pollution is a key element to good health of people. At the same time, indoor air pollution is one of 5 environmental risk factors to the public health. Under most indoor environments, microbial suspension in the air is the chief culprit to transmitted diseases and it is a factor that many people ignore because these organisms, whose body size is ranging from several micrometres to more than 10 micrometres, are invisible to the naked eye. In recent years, these germs bring much more intense effect, including frequent occurrences of sick building syndrome, elevated nosocomial infection rate, rapid increase o
Scope: This document specifies the measurement of the output of a UV-C lamp, types of UV-C lamp, lamp ballast, and safety issues. It is applicable to the output measurement of linear UV-C disinfection lamps. This document specifies a measurement method for evaluating output power of UV-C lamps installed in heating, ventilation and air conditioning (HVAC) systems. The method includes the simulation measurement of UV-C output power of UV-C lamps under various temperatures and various air velocities, and under conditions that the axial direction of the lamp is parallel or perpendicular to the air flow direction. It can reliably evaluate and compare the UV-C output power of UV-C lamps in the ultraviolet germicidal irradiation (UVGI) device based on the testing results. If the microbial inactivation rate of a particular UVGI device equipped with the same type of UV-C lamp is known, the microbial inactivation rate of the UVGI device at various temperatures and at various air velocities can be evaluated.