Photography — Electronic still-picture imaging — Noise measurements
Introduction: Noise is an important attribute of electronic still-picture imaging. If noticeable levels of noise exist in the images captured by a camera, then detail textures of objects are lost in reproduction and the visibility of the images is degraded. Therefore, measurement methods for noise are very important and are needed to provide important information relevant to evaluating image fidelity and the visibility of noise in captured images. Measurement methods are also important for assessing camera performance relative to these image quality factors. The primary sources of noise in captured images are photon shot noise, dark current shot noise, analogue processing readout noise of image sensors, and quantization noise of A/D converters. This type of noise source adds spatially random noise to captured still images, whose spatial pattern differs from frame to frame. The other type of noise source includes dark current pattern noise, row/column pattern noise, and photo response non-uniformity of image sensors. This type of noise source also introduces spatially random noise in captured images; however, its spatial pattern does not change under the same shooting conditions. The noise level introduced by these sources in output images is highly dependent on shooting conditions, such as the camera exposure time, aperture value, and ISO sensitivity. Camera operating temperature is also an influential factor. Some camera processing, such as contrast amplification and noise reduction, heav
Scope: This document specifies methods for measuring and reporting the noise versus signal level and dynamic range of digital still cameras. It applies to both monochrome and colour electronic digital still cameras.