Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time lag
Introduction: Taking pictures of a moving target was nearly impossible in the early days of digital photography. After pressing the exposure button it took a significant amount of time to capture the image and the chance to preserve the desired moment was gone. Part of the time between pressing the exposure button and the exposed picture is needed to focus, another part is needed to adjust the exposure, etc. This unwelcome but unavoidable period of time is called shooting time lag. This is often mixed with the term shutter release time lag, which is also defined in this document. Optimized systems are nowadays able to decrease these time lags. Capturing the different stages of a fast moving object is sometimes very important especially in areas like sports or people photography. This high shooting rate requires fast image processing within the digital still camera that can be measured according to the method described in this document. When a photographer decides to capture an image of a changing scene, if his or her digital still camera takes a long time to be ready to shoot once it is turned on, the opportunity to capture the image is lost. This time named start-up time lag is therefore another important value, which can be determined using this document. © ISO 2019 – All rights reserved
Scope: This document specifies how to measure and report the shooting time lag, shutter release time lag, shooting rate and start-up time lag for digital still cameras, including camera modules in phones and tablet computers. It includes a method that uses control signals inside the digital still camera and a method that determines the timing values without requiring access to the inside of the digital still camera. This document does not address the measurement either of auto focus speed below recommended illumination level or auto focus accuracy.