ISO 15901-1-2016 PDF

ISO 15901-1-2016 PDF

Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry

$96.50 $193.00 -50%
Product Code: ISO 15901-1
Stock In Stock
Edition: 2ND
Published: 04/01/2016
Number of Pages: 26
File Size: 1 file, 445 Bytes

Available Options

Product Description

Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry

Introduction: In general, different pores (micro-, meso-, and macropores) may be pictured as either apertures, channels or cavities within a solid body or as space (i.e. interstices or voids) between solid particles in a bed, compact or aggregate. Porosity is a term which is often used to indicate the porous nature of solid material and in this International Standard is more precisely defined as the ratio of the total pore volume of the accessible pores and voids to the volume of the particulate agglomerate. In addition to the accessible pores, a solid may contain closed pores which are isolated from the external surface and into which fluids are not able to penetrate. The characterization of closed pores is not covered in this International Standard. Porous materials may take the form of fine or coarse powders, compacts, extrudates, sheets or monoliths. Their characterization usually involves the determination of the pore size distribution as well as the total accessible pore volume or porosity. For some purposes it is also necessary to study the pore shape and interconnectivity and to determine the internal and external specific surface area. Porous materials have great technological importance, for example in the context of the following: — controlled drug release; — catalysis; — gas separation; — filtration including sterilization; — materials technology; — environmental protection and pollution control; — natural reservoir rocks; — building materials; — polymers and ceramic. It is wel

Scope: This International Standard describes a method for the evaluation of the pore size distribution and the specific surface area of pores in solids by mercury porosimetry according to the method of Ritter and Drake[1][2]. It is a comparative test, usually destructive due to mercury contamination, in which the volume of mercury penetrating a pore or void is determined as a function of an applied hydrostatic pressure, which can be related to a pore diameter. Practical considerations presently limit the maximum applied absolute pressure to about 400 MPa (60 000 psi) corresponding to a minimum equivalent pore diameter of approximately 4 nm. The maximum diameter is limited for samples having a significant depth due to the difference in hydrostatic head of mercury from the top to the bottom of the sample. For the most purposes, this limit can be regarded as 400 µm. The measurements cover inter-particle and intra-particle porosity. In general, without additional information from other methods it is difficult to distinguish between these porosities where they co-exist. The method is suitable for the study of most porous materials non-wettable by mercury. Samples that amalgamate with mercury, such as certain metals, e.g. gold, aluminium, copper, nickel and silver, can be unsuitable with this technique or can require a preliminary passivation. Under the applied pressure some materials are deformed, compacted or destroyed, whereby open pores may be collapsed and closed pores opened. In some cases it may be possible to apply sample compressibility corrections and useful comparative data may still be obtainable. For these reasons, the mercury porosimetry technique is considered to be comparative.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15901-1-2016 PDF

ISO 15901-1-2016 PDF

$96.50 $193.00