Detection and avoidance systems for uncrewed aircraft systems
Introduction: With rapid technological advancements, uncrewed aerial systems (UAS) are continuing to become more autonomous in operation and accessible to consumers. Today, the use of UAS technology is not only prevalent for entertainment purposes but also extending into various industrial applications such as logistics, disaster release, powerline inspection. There is an increasing number of UAS operations in low altitude airspace where the safety considerations can be quite complex, especially in the context of urban areas. All types of UAS operating in such areas must be able to avoid ground objects like high-rise buildings, cranes, public utilities such as power grid and mobile network antennas, along with other users of the same airspace such as low-flying helicopters, other UASs and kites. Micro-weather patterns also pose a challenge because of their uncertainty, invisibility, and unpredictability. A detection and avoidance (DAA) system is one of the key onboard systems to address these challenges. By sensing the surrounding situations, the DAA system can examine the size and distance of a particular obstacle, apply trajectory planning and then calculate the possibility of collision. It orders the flight control system to make UAS deceleration, completely stop or offset the obstacle in a fully autonomous manner. The function and performance of the DAA system is closely related to its safety speed, which has a direct impact on the scope of UAS. Failure detection also causes instabilit
Scope: This document specifies safety and quality requirements for detection and avoidance (DAA) systems used between uncrewed aircraft systems (UAS) and other objects including aircraft. This document includes the requirements for radars and optical sensors used for DAA and is derived to meet the requirements for UAS operations involving DAA set out in ISO 21384-3.