ISO 16000-44-2023 PDF

ISO 16000-44-2023 PDF

Indoor air-Part 44: Test method for measuring perceived indoor air quality for use in testing the performance of gas phase air cleaners

$71.50 $143.00 -50%
Product Code: ISO 16000-44
Stock In Stock
Edition: 1.
Published: 12/2023
Number of Pages: 24
File Size: 1 file, 975 Bytes

Available Options

Product Description

Indoor air — Part 44: Test method for measuring perceived indoor air quality for use in testing the performance of gas phase air cleaners

Introduction: There is an increased interest in the development of air cleaners removing gaseous pollutants. Such air cleaners are also called air purifiers. They have been marketed for reducing concentrations of gaseous pollutants using different removal principles including among others physical and physicochemical sorption or oxidation (mineralization). The performance of gas phase air cleaners can be evaluated by their removal efficiency defined by the ratio of concentration of pollutants downstream and upstream an air cleaner in the case of single pass efficiency. Removal efficiency can also be obtained by determining the change of concentration in a room where an air cleaner is in operation. Removal efficiency is consequently used to calculate clean air delivery rate i.e. the equivalent airflow delivered by an air cleaner that does not contain pollutants that were removed by an air cleaner (unpolluted air). The removal efficiency is usually determined using a single pollutant or a mixture of up to a few pollutants thus not capturing the entire spectrum of pollutants present. For this purpose, sensory assessment of air quality made by human subjects can be made. The ratings of air quality as perceived by people are not normally used (seldom) to assess the removal efficiency of air cleaners although, based on them, ventilation requirements prescribed by standards in many parts of the world have been determined. Because measurements of chemical compounds will seldom capture all pollutan

Scope: This document specifies a laboratory test method for measuring perceived air quality using human subjects that can be used for assessing the performance of air cleaners removing gas-phase pollutants. The method describes the performance of gas-phase air cleaners with respect to removal of pollutants that can be sensed by human subjects. The method has a reference to sensory tests specified in ISO 16000-28. Air cleaners removing particles and aerosols (mechanical or electronic filters) can also remove pollutants responsible for sensory response. The method described in this document does not apply to testing of these air cleaners.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16000-44-2023 PDF

ISO 16000-44-2023 PDF

$71.50 $143.00