Wildland firefighting personal protective equipment — Requirements and test methods — Part 9: Firehoods
Introduction: This document provides minimum performance requirements for wildland firefighters' personal protective equipment (PPE) firehoods, designed for use for extended periods during wildland firefighting. Wildland firefighting involves work carried out mostly in summer temperatures and for many hours, during which the firefighter can develop high levels of metabolic heat. As a consequence, the PPE is required to be of low mass, flexible and commensurate with the risks to which the firefighter can be exposed in order to be effective without introducing excessive heat stress to the wearer. Firefighters should be trained in the selection, use, care and maintenance of the PPE covered by this document, including an understanding of its limitations. It is intended that a risk assessment be undertaken to determine if the PPE covered by this document is suitable for its intended use and the expected exposure. © ISO 2020 – All rights reserved
Scope: This document specifies the minimum performance requirements and methods of test for firehoods that cover the head and neck and are used for wildland firefighting. An optional requirement has been included to provide limited protection against particulate contaminants This document covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. This PPE is not intended to provide protection during fire entrapment. This document does not cover firehoods for structural firefighting (see ISO 11999-9). This document only applies in situations when compatible protective clothing, helmet, and when necessary respiratory protection devices are also worn.