Ductile iron pipes and fittings — Seal coats for cement mortar linings
Introduction: The intended purpose of a seal coat is to reduce the contact between a cement mortar lining and the contents of a water main, thereby restricting the leaching of inorganic materials into the water supply. Seal coats are usually specified where the pipeline is to convey soft waters and/or where residence times are very long. Supply water quality data for such pipelines need to be discussed between the prospective client and the seal coated pipe supplier to ensure the suitability of the product for use. Attention is drawn to the fact that national or international water supply or water quality regulations can apply for seal coated cement mortar lined surfaces that are in contact with, or likely to come into contact with, potable water. Approval can be needed for the individual components of the system, or for the combined system, depending upon the requirements of those national or international water supply or water quality regulations when used: — in accordance with the product manufacturer's instructions for use, — under any other appropriate conditions defined for that product within any published list of substances, products and processes approved to those water supply or water quality regulations. © ISO 2024 – All rights reserved
Scope: This document specifies the requirements for seal coatings for factory application to the surfaces of cement mortar linings, which are factory applied to the interior of ductile iron pipes and fittings. It provides the performance requirements for short-term sealing efficiency, long-term durability and cyclic pressure, as well as the routine testing requirements for visual appearance, coating thickness and adhesion. This document is applicable to products for potable and irrigation water and for other applications as per agreement between manufacturer and customer.