ISO 16321-4-2025 PDF

ISO 16321-4-2025 PDF

Eye and face protection-Part 4: Protection against biological hazards

$96.50 $193.00 -50%
Product Code: ISO 16321-4
Stock In Stock
Edition: 1.
Published: 10/2025
Number of Pages: 32
File Size: 1 file, 2 Bytes

Available Options

Product Description

Eye and face protection — Part 4: Protection against biological hazards

Introduction: This document has been developed in the context of the COVID 19 pandemic, with significant learnings relating to infection control procedures accelerated in 2020. When developing this document, there were a number of lightweight protectors being used that do not conform with the requirements of ISO 16321-1, in particular the mechanical requirements. As these lightweight protectors provide protection only against biological hazards, a separate standard was created with requirements relating to biological hazards and no requirements relating to mechanical hazards (except that the lens or face shield should not break under minor impact to create a secondary hazard). In addition, the spray and spurt tests were adopted as they are more representative of the biological hazards associated with human and animal biological fluids, than the resistance to splash or streams of liquids methods in ISO 16321-1. Annex A provides information intended to guide end users and organizations about the appropriate personal protective equipment (PPE) specifically relating to eye or eye and face protection. The guidance is based on knowledge of best-practice and may be used to help define and develop procedures and practice, incorporating the use of products conforming with this document. The requirements and principles apply independently of the method of manufacture. © ISO 2025 – All rights reserved

Scope: This document specifies minimum requirements for light-weight protectors designed to provide protection for the eyes or eyes and face from biological hazards, such as pathogenic micro-organisms in human or other animal bodily fluids that can deposit onto the face or eyes. NOTE 1 Typical scenarios for use include healthcare, retail and transport settings. This document specifies requirements for both single-use (disposable) and re-usable (disinfectable) products or components. This document applies to all afocal (plano) and prescription lensed protectors and their components. This document does not cover the respiratory equipment required for protection against aerosols, which can be used in conjunction with these eye protectors, and for which other standards apply. This document does not apply to — protectors intended for protection from specific hazards, e.g. mechanical hazards, harmful artificial optical radiation, dusts, molten metals, heat, flame, hot solids, harmful gases, vapours (refer to ISO 16321-1 to ISO 16321-3), — protectors specifically for sports (refer to the ISO 18527 series), — protectors for lasers (refer to ISO 19818-1), and — respiratory protection against aerosols (refer to ISO/TS 16975-4). NOTE 2 Guidance related to the specific selection, use and maintenance is provided in Annex A. NOTE 3 Where eye and face protection is incorporated in protective equipment, such as a hood, full face respirators, powered air purifying respirators (PAPR) hoods and headtops, the relevant requirements of this document apply to the components providing eye and face protection.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16321-4-2025 PDF

ISO 16321-4-2025 PDF

$96.50 $193.00