Heavy commercial vehicles and buses - Stopping distance in straightline braking with ABS - Open loop and closed loop test methods
Introduction: The main purpose of this International Standard is to provide repeatable and discriminatory test results. The stopping distance and the dynamic behaviour of a road vehicle is a most important aspect of active vehicle safety. Any given vehicle, together with its driver and the prevailing environment, constitutes a closed-loop system which is unique. The task of evaluating the dynamic behaviour is therefore very difficult, since the significant interaction of these driver-vehicle-road elements are each complex in themselves. A complete and accurate description of the behaviour of the road vehicle shall inevitably involve information obtained from a number of different tests. Since this test method quantifies only one small part of the complete handling characteristics, the results of this test can only be considered significant for a correspondingly small part of the overall dynamic behaviour. Moreover, insufficient knowledge is available to correlate overall vehicle dynamic properties with accident prevention. A substantial amount of work is necessary to acquire sufficient and reliable data on the correlation between accident prevention and vehicle dynamic properties in general and the results of this test in particular. Consequently, any application of this test method for regulation purposes will require proven correlation between test results and accident statistics. Test conditions and tyres have a strong influence on test results. Therefore, only results obtained under co
Scope: This International Standard describes test methods for determining the stopping distance during a straight-line braking manoeuvre with the braking system fully operational. It applies to heavy vehicles equipped with an anti-lock braking system (ABS), including commercial vehicles, commercial vehicle combinations, buses and articulated buses as defined in ISO 3833 (trucks and trailers with maximum weight above 3,5 tonnes and buses and articulated buses with maximum weight above 5 tonnes, according to ECE and EC vehicle classification, categories M3, N2, N3, O3, and O4).
Contents:
- Foreword
- Introduction
- Scope