ISO 16610-22-2026 PDF

ISO 16610-22-2026 PDF

Geometrical product specifications (GPS)-Filtration-Part 22: Linear profile filters: Spline filters

$89.50 $179.00 -50%
Product Code: ISO 16610-22
Stock In Stock
Edition: 2.
Published: 03/2026
Number of Pages: 30
File Size: 1 file, 2.7 MB

Available Options

Product Description

Spécification géométrique des produits (GPS) - Filtrage - Partie 22: Filtres de profil linéaires: Filtres splines

Introduction: This document is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO 14638). It influences chain links C and E in the GPS matrix structure. The ISO GPS matrix model given in ISO 14638 gives an overview of the ISO GPS system of which this document is a part. The fundamental rules of ISO GPS given in ISO 8015 apply to this document and the default decision rules given in ISO 14253-1 apply to the specifications made in accordance with this document, unless otherwise indicated. For more information on the relationship of this document to the filtration matrix model, see Annex C. For more detailed information on the relation of this document to other standards and the GPS matrix model, see Annex D. This document develops the terminology and concepts of linear spline filters for surface profiles. Linear spline filters for surface profiles have a transmission of 50 % for sinusoidal surface profiles with wavelengths equal to the cut-off wavelength. They separate the large- and small-scale lateral components of surface profiles in such a way that the surface profiles can be reconstructed without altering. Depending on the selected nesting index and tension parameter, linear spline filters offer one method for F-operation. © ISO 2026 – All rights reserved

Scope: This document specifies linear spline filters for the filtration of surface profiles. It defines, in particular, how to separate large- and small-scale lateral components of surface profiles. The concepts presented for closed profiles are applicable to the case of roundness filtration. Where appropriate, these concepts can be extended to generalized closed profiles, especially for surface profiles with re-entrant features. Examples for the application of the spline filter are given in Annex A. The influence of the tension parameter β on the large-scale lateral component of the profile is shown in Annex B.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16610-22-2026 PDF

ISO 16610-22-2026 PDF

$89.50 $179.00