ISO 16696-1-2019 PDF

ISO 16696-1-2019 PDF

Timber structures - Cross laminated timber - Part 1: Component performance, production requirements and certification scheme

$96.50 $193.00 -50%
Product Code: ISO 16696-1
Stock In Stock
Edition: 1ST
Published: 02/2019
Number of Pages: 32
File Size: 1 file, 1 Byte

Available Options

Product Description

Timber structures - Cross laminated timber - Part 1: Component performance, production requirements and certification scheme

Introduction: The general principle of this document is that a certain level of performance and production techniques are required in the production of cross laminated timber (CLT) to be acceptable for structural application of the product. This document specifies the minimum requirements for CLT production and performance assessment. This document was based heavily on the draft European Standard EN 16351 prepared by Technical Committee CEN/TC 124 and the North American Standard ANSI/APA PRG 320. The technical contents from these standards were merged and modified to bring it into conformance with ISO procedures and requirements. The ISO 16696 series consists of two parts: this document (Part 1) gives performance and production requirements for CLT, which also includes conformance requirements, as provided in Annex D; ISO 16696-2 provides guidance on how CLT is to be installed and used. The bibliography lists standards referenced during the development of this document. vi © ISO 2019 – All rights reserved

Scope: This document establishes the basic principles for component performance and minimum production requirements for cross laminated timber (CLT). This document also contains scheme requirements for conformance, as provided in Annex D. The document is applicable to CLT products which are manufactured from solid-sawn timber or wood based panels built up of at least three layers in which the grain of adjoining layers are at right angles to each other. This document provides CLT dimension tolerances; component requirements; performance criteria; production, testing and trade marking guidance; and minimum requirements for factory production control. This document is based on known species, species combination and/or wood based panel structural performance and bondability. CLT qualified in accordance with the provisions of this document are intended to resist the effects of moisture on structural performance as can occur due to construction delays or other conditions of similar severity. NOTE This document does not include how CLT is to be used and installed, as it will be detailed in ISO 16696-2.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16696-1-2019 PDF

ISO 16696-1-2019 PDF

$96.50 $193.00