ISO 16840-10-2026 PDF

ISO 16840-10-2026 PDF

Wheelchair seating-Part 10: Requirements and test method for the assessment of resistance to ignition of postural support devices

$96.50 $193.00 -50%
Product Code: ISO 16840-10
Stock In Stock
Edition: 3.
Published: 11/2026
Number of Pages: 30
File Size: 1 file, 5.8 MB

Available Options

Product Description

Wheelchair seating — Part 10: Requirements and test method for the assessment of resistance to ignition of postural support devices

Introduction: The ignition and subsequent burning of wheelchairs is very rare, but this can occur as a result of — being close to a burning object such as a fire beside the wheelchair, — overheating of any electrical or electronic device on the wheelchair, and — contact from sparks or flames (such as welding sparks, cigarettes, or matches). Wheelchair occupants are at particular risk of injury or death from these fires and resulting fumes because it is very possible that they do not have the ability to move away from the wheelchair. NOTE In the United States, data collected in the 1990s showed that only a small number of individuals per million wheelchair users had died due to fire[5]. Public FDA records indicate most 21st century flammability incidents involving wheelchairs are from electrical faults[6]. Wheelchairs can be considered to comprise the following components: a) structural components such as the frame, wheels, etc., that are essential to the mechanical integrity of the wheelchair; b) power-related components such as motors, energy sources, controllers etc., that are required for the functioning of powered devices on wheelchairs. c) integrated or non-integrated devices to manage tissue integrity, such as seat and back support cushions, that are intended to have primarily a clinical function to minimize the risks of skin damage (these can also be intended to control or accommodate posture); d) postural support devices, including, but not limited to, sling seats, sling back suppo

Scope: This document specifies requirements and a test method to assess the resistance to ignition by a smouldering cigarette equivalent of integrated or non-integrated components of a wheelchair intended either to protect tissue integrity or to provide postural support, or both. The electrical ignition source is also a simulation of other potential sources of environmental ignition hazards. The test measures only the resistance to ignition of the items tested, and not the ignitability of the complete wheelchair. It gives an indication of, but cannot guarantee, the ignition behaviour of the assembled devices of a complete wheelchair. This document does not apply to resistance to ignition of structural parts of a wheelchair. This document does not cover changes in resistance to ignition as a result of regular washing or use of the postural support devices. This document allows for the separate testing of components of a wheelchair that are normally used in the horizontal plane (e.g. a seat cushion) from those normally used in the vertical plane (e.g. a back support). This document describes testing an assembly of the composite of materials as used in the component. The results of the test in this document do not give any indication of the resistance to ignition of any of the separate individual materials of the test sample. NOTE 1 The intent of this document is primarily to address components that interface with the human body, such as cushions for positioning, or whose described purpose is that of protecting skin tissue against pressure, shear, and maceration related damage, as well as textile, foam, and plastic-based postural support devices. NOTE 2 The pass criteria within this document have been set at a basic minimal level and can differ from current requirements in some countries. NOTE 3 Requirements for the control of risks from sources of fire created by electrical and electronic components are included in ISO 7176-14.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16840-10-2026 PDF

ISO 16840-10-2026 PDF

$96.50 $193.00