ISO 16840-3-2022 PDF

ISO 16840-3-2022 PDF

Wheelchair seating-Part 3: Determination of static, impact, and repetitive load strengths for postural support devices

$129.00 $258.00 -50%
Product Code: ISO 16840-3
Stock In Stock
Edition: 3.
Published: 10/2022
Number of Pages: 48
File Size: 1 file, 2 Bytes

Available Options

Product Description

Wheelchair seating — Part 3: Determination of static, impact, and repetitive load strengths for postural support devices

Introduction: Postural support devices (PSDs), constructed as additional components to wheelchair seating or as wheelchair seating in its own right, are widely available and used extensively by people with disabilities. The selection or prescription of the most appropriate PSD is intended to be, where appropriate, partially dependent on knowledge of the PSD’s ability to withstand static, impact, and repetitive loads. This document specifies test methods and requirements for the strength of PSDs as manufactured, which are designed to identify likely points of failure by breaking, yielding, or loosening of components - it is not intended to predict the long-term useful life. The useful life of a device depends upon many variables of use, aging, and environment: the way in which it is installed, the frequency of use and forces to which it is subjected, abrasion points, vibration and fatigue, cleaning and periodic maintenance, and temperature, humidity and UV exposure. The tests involve mounting the PSD to a rigid test fixture to simulate mounting on a wheelchair. Rigid test fixtures are used to provide a worst-case situation, by minimizing shock-absorption that can come, for example, from the damping effects of flex in the wheelchair frame, and also to make these tests repeatable by removing the variable of wheelchair type. Repetitive, static, and impact loads are then applied, as appropriate, according to the type of PSD, to determine if the minimum strength requirements are met. When a seri

Scope: This document specifies requirements for static, impact, and repetitive load strengths for postural support devices (PSDs) with associated attachment hardware intended for use with an undefined wheelchair seating system. It specifies the test methods for determining whether the minimum performance requirements have been met to release a product into use. It also specifies requirements for disclosure of the test results. Not all tests apply to all PSDs. This document includes sets of tests for these particular types of PSDs listed in Table 1: Table 1 — Index of tests PSD Repetitive Static Impact Seat cushion supporting structure Back cushion supporting structure Pelvic positioning Anterior trunk support Lateral support Medial knee support Head support Lower arm positioning devices Foot support NOTE 1 Seat Cushion Supporting Structure is the system upon which the seat cushion is mounted. NOTE 2 Back Cushion Supporting Structure is the system upon which the back support is mounted. Repetitive and static tests are under development for non-integrated, lower arm positioning devices. Arm support static test protocols are defined in ISO 7176-8 for supports which are integrated within the wheelchair. Static and impact foot support test protocols are defined in ISO 7176-8 for supports which are integrated within the wheelchair. This document is also applicable to other seating systems. The test methods can be used to verify the manufacturer’s claims that a product meets the requirements of this document. This document does not apply to PSDs that are designed to fail under certain static, dynamic, or repetitive loads. This document does not apply to the strength of PSDs under crash conditions in a motor vehicle. © ISO 2022 – All rights reserved ISO 16840-3:2022(E) This document does not evaluate long-term useful life. NOTE 1 ISO 16840-4 provides crash test methods and requirements for wheelchair seating systems when used as part of a wheelchair seat in a motor vehicle. NOTE 2 For user masses greater or less than those specified in this document, appropriate extrapolation of test apparatus dimensions, mounting point separation, forces, etc. can be carried out, and the test

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16840-3-2022 PDF

ISO 16840-3-2022 PDF

$129.00 $258.00