ISO 16866-2020 PDF

ISO 16866-2020 PDF

Metallic and other inorganic coatings-Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)

$48.00 $96.00 -50%
Product Code: ISO 16866
Stock In Stock
Edition: 1ST
Published: 10/2020
Number of Pages: 18
File Size: 1 file, 1 Byte

Available Options

Product Description

Metallic and other inorganic coatings — Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)

Introduction: The abbreviated term “STEP” represents “Simultaneous Thickness and Electrode Potential determination”. The STEP test can be used to measure, in one single operating step, the parameters (thickness of the individual nickel layers and the potential differences among them) relevant for the course of corrosion in a multilayer nickel system. Provided suitable instruments are applied, it can also be used to document them. The test is a modification of the well-known coulometric method for the measurement of the coating thickness. This method takes advantage of the fact that, following the anodic dissolution of a nickel coating, a potential jump takes place of which the magnitude can be measured against a reference electrode. Although, nowadays, the STEP test has been incorporated into a number of company standards, particularly in the automobile industry, there are currently no uniform and generally acknowledged potential difference values available. At present, values between 80 mV and 150 mV are assumed for double nickel layers, with the semi-bright nickel layer always being nobler than the bright one. Likewise, no obligatory numerical values are available, currently, regarding the potential difference between bright nickel layers and existing special nickel layers (e.g. in the case of micro-porous chromium plating). According to the current practical experience, the potential difference is larger than approximately 20 mV, with the bright nickel layer always having to be less nob

Scope: This document specifies a method for measuring the thickness of the individual nickel layers in electroplated multilayer nickel coatings and measuring the potential differences between the individual nickel layers in electroplated multilayer nickel coatings. The measurement of coatings or layer systems other than electroplated multilayer nickel coatings is outside the scope of this document.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16866-2020 PDF

ISO 16866-2020 PDF

$48.00 $96.00