ISO 16994-2026 PDF

ISO 16994-2026 PDF

Solid biofuels and pyrogenic biocarbon-Determination of sulfur and chlorine content

$60.00 $120.00 -50%
Product Code: ISO 16994 (2026)
Stock In Stock
Edition: 3.
Published: 06/2026
Number of Pages: 18
File Size: 1 file, 500 KB

Available Options

Product Description

Biocombustibles solides - Détermination de la teneur totale en soufre et en chlore

Introduction: Sulfur and chlorine are present in solid biofuels and pyrogenic biocarbon in varying concentrations. During the combustion process, they are usually converted to sulfur-oxides and chlorides. The presence of these elements and their reaction products can contribute significantly to corrosion and to environmentally harmful emissions. Chlorine can be present in different organic and inorganic compounds and can exceed or equal the water- soluble amount that can be determined by ISO 16995. Fluorine and bromine can also be present in solid biofuels and pyrogenic biocarbon, but in detectable concentration only in specific types of biomass, like in aquatic biofuels (Br) or as contamination because of chemical treatment (F). Both elements can be analysed using the same techniques and equipment as for chlorine and sulfur described in this document. Combustion in an oxygen atmosphere in a closed combustion vessel is the preferred method to digest biomass samples for a determination of sulfur, chlorine, fluorine and bromine content. An advantage of the method is that the digestion can be carried out in connection with the determination of the calorific value according to ISO 18125. Other analytical techniques may also be used for selected analytes. The determination of the resultant chlorine, sulfur, bromine and fluorine compounds can be done by different techniques. Automatic equipment and alternative methods may also be used for selected analytes. A list with typical sulfur, chlorine a

Scope: This document describes methods for the determination of sulfur and chlorine content in solid biofuels and pyrogenic biocarbon and specifies two methods for decomposition of the fuel and different analytical techniques for the quantification of the elements in the decomposition solutions. The determination of other elements such as fluorine and bromine are also possible with the methods in this document, however performance data for these elements are not provided. The use of automatic equipment is also included in this document, provided that a validation is carried out as specified and that the performance characteristics are similar to those of the method described in this document.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 16994-2026 PDF

ISO 16994-2026 PDF

$60.00 $120.00