ISO 17201-4-2025 PDF

ISO 17201-4-2025 PDF

Acoustics-Noise from shooting ranges-Part 4: Calculation of projectile sound

$129.00 $258.00 -50%
Product Code: ISO 17201-4
Stock In Stock
Edition: 2.
Published: 07/2025
Number of Pages: 48
File Size: 1 file, 2 Bytes

Available Options

Product Description

Acoustics — Noise from shooting ranges — Part 4: Calculation of projectile sound

Introduction: Shooting sound registered around shooting ranges consists in general of three components: muzzle blast sound, impact sound and projectile sound. This document deals solely with the projectile sound from supersonic projectiles. It specifies a method for calculating the source sound exposure level of projectile sound. It also provides a method for calculating the propagation of projectile sound, accounting for its distinct characteristics that set it apart from the propagation of sound originating from other sources. This document is intended for calibres of less than 20 mm but can also be used for larger calibres. Projectile sound is described as originating from a specific point on the projectile trajectory, the “source point.” The source sound exposure level is calculated from the geometric properties and the speed of the projectile along its trajectory. Methods are given on how the sound exposure level at a receiver location is to be calculated from this source sound exposure level, taking into account geometrical attenuation, atmospheric absorption and attenuation and frequency shift due to non-linear effects. In addition, the effects on the sound exposure level due to the decrease of the projectile speed and atmospheric turbulence are taken into account. In a restricted region, the Mach region (region II – see 4.2), the projectile sound exposure level is significant compared to the muzzle blast sound exposure level. Outside this region only diffracted or scattered project

Scope: This document specifies computational methods for determining the acoustical source level of projectile sound and its one-third octave band spectrum, expressed as the sound exposure level for nominal mid-band frequencies from 12,5 Hz to 10 kHz. It also specifies a method on how to use this source level to calculate the sound exposure level at a receiver position. Results obtained with this document can be used as a basis for assessment of projectile sound from shooting ranges. Additionally, the data can be used to determine sound emission or immission from different types of ammunition and weapons. The prediction methods are applicable to outdoor conditions and straight projectile trajectories. Two computational methods are given to determine the acoustical source level: one for streamlined projectile shapes and one for non-streamlined shapes, such as pellets.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17201-4-2025 PDF

ISO 17201-4-2025 PDF

$129.00 $258.00