ISO 17208-1-2016 PDF

ISO 17208-1-2016 PDF

Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 1: Requirements for precision measurements in deep water used for comparison purposes

$13.00 $26.00 -50%
Product Code: ISO 17208-1
Stock In Stock
Edition: 1.
Published: 03/15/2016
Number of Pages: 28
File Size: 1 file, 702 Bytes

Available Options

Product Description

Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 1: Requirements for precision measurements in deep water used for comparison purposes

Introduction: This part of ISO 17208 was developed to provide a standardized measurement method for the quantification and qualification of a ship’s underwater radiated noise level. This procedure measures a sector average for a certain beam aspect. It promotes the consistency of reported sound measurements from shipping sources. This part of ISO 17208 provides users with the necessary procedure to compare a ship’s radiated noise level to criteria established by others or to contract specifications. Reduction of all types of ship emissions, most notably ballast water and engine emissions, became an issue in the decade prior to publication of ISO/PAS 17208-1:2012. ISO/PAS 17208-1:2012 was developed in response to growing international concerns about underwater noise and its impact on marine animals. Excessive underwater noise has the potential to interfere with a marine animal’s ability to perform a variety of critical life functions, including navigation, communication and finding food. Because of this, the environmental impact statements of underwater projects such as pile driving, pipe laying and oil exploration now include assessments of underwater noise impact. This part of ISO 17208 converts the PAS to an International Standard and limits its focus to a precision grade of measurement. © ISO 2016 – All rights reserved

Scope: This part of ISO 17208 specifies the general measurement system, procedure, and methodology used for the measurement of underwater sound from ships under a prescribed operating condition. It does not specify or provide guidance on underwater noise criteria or address the potential effects of noise on marine organisms. The resulting quantities are based on the root-mean-square sound pressure levels (SPL), herein used synonymously with sound pressure level or SPL measured in the far field of the ship and normalized to a distance of 1 m and reported in one-third octave bands (see 4.3). In this part of ISO 17208, the result of these measurements is called “radiated noise level”. The underwater sound pressure level measurement is performed in the geometric far field and then adjusted to the 1 m normalized distance for use in comparison with appropriate underwater noise criteria. This part of ISO 17208 is applicable to any and all underway surface vessels, either manned or unmanned. It is not applicable to submerged vessels or to aircraft. The method has no inherent limitation on minimum or maximum ship size. It is limited to ships transiting at speeds no greater than 50 kn (25,7 m/s). The measurement method smooths the variability caused by Lloyd’s mirror surface image coherence effects, but does not exclude a possible influence of propagation effects like bottom reflections, refraction and absorption. No specific computational adjustments for these effects are provided in this part of ISO 17208. A specific ocean location is not required to use this part of ISO 17208, but the requirements for an ocean test site are provided. The intended uses of the method described in this part of ISO 17208 are: to show compliance with contract requirements or criteria, for comparison of one ship to another ship, to enable periodic signature assessments, and for research and development. The intended users include government agencies, research vessel operators, and commercial ship owners. Additional post-processing would be required to use the data obtained from this measurement method for determination of the ship source levels to perform far field noise predictions such as needed

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17208-1-2016 PDF

ISO 17208-1-2016 PDF

$13.00 $26.00