ISO 17208-2-2019 PDF

ISO 17208-2-2019 PDF

Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 2: Determination of source levels from deep water measurements

$71.50 $143.00 -50%
Product Code: ISO 17208-2
Stock In Stock
Edition: 1ST
Published: 07/2019
Number of Pages: 20
File Size: 1 file, 2 Bytes

Available Options

Product Description

Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 2: Determination of source levels from deep water measurements

Introduction: This document has been developed in response to the demand, noted by the International Maritime Organization (IMO) and its Marine Environment Protection Committee (MEPC), for an International Standard for measurement of underwater sound radiated from ships. In this document, the sound radiated by the ship under test is described in terms of an equivalent monopole source level. The scientific research on the impact of underwater sound on the marine ecosystem necessitates the accumulation of reliable acoustic output data for common sources such as surface vessels. These data can be obtained through at-sea measurement by relevant organizations, such as research institutes, by applying the measurement methodology described in ISO 17208-1. The methodology and measurement configuration are sufficient to give technically sound acoustic data, but are also suitable for end users to conduct the measurements in situ in the ocean without access to large fixed noise ranges. The measurement of underwater sound radiated from ships depends upon various conditions related to the vessel under test and its surrounding environment. Specifically, the speed, draught and operational conditions of the engine(s) of the ship influence the level of radiated underwater sound. Waves, current, depth, temperature and salinity of the water also influence the propagation of underwater sound. The sea surface and bottom can reflect acoustical waves. Ambient noise sources, such as traffic, industry, biological,

Scope: This document specifies methods for calculating an equivalent monopole source level by converting radiated noise level values obtained in deep water according to ISO 17208-1. Procedures are also given for direct calculation from measurements made in deep water with specific hydrophone geometry. The source level calculated by the procedure in this document is that of an equivalent monopole source at a specified nominal source depth, and for broadside aspect only. The nominal source depth is intended to be reported with the equivalent monopole broadside source level value.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17208-2-2019 PDF

ISO 17208-2-2019 PDF

$71.50 $143.00