ISO 17215-1-2014 PDF

ISO 17215-1-2014 PDF

Road vehicles - Video communication interface for cameras (VCIC) - Part 1: General information and use case definition

$48.00 $96.00 -50%
Product Code: ISO 17215-1
Stock In Stock
Edition: 1ST
Published: 04/15/2014
Number of Pages: 18
File Size: 1 file, 536 Bytes

Available Options

Product Description

Road vehicles - Video communication interface for cameras (VCIC) - Part 1: General information and use case definition

Introduction: Driver assistance systems are more and more common in road vehicles. From the beginning, cameras were part of this trend. Analogue cameras were used in the beginning, because of lower complexity of the first systems. With increasing demand for more advanced functionality, digital image processing has been introduced. So-called one box design cameras (combining a digital image sensor and a processing unit) appeared in the vehicles. Currently, the market demands such systems with multiple functions. Even different viewing directions are in use. It seems to be common sense that six up to 12 cameras in a single vehicle will be seen in the next future. Out of this and the limitation in size, power consumption, etc. it will lead to designs where the cameras are separated from the processing unit. Therefore, a high performance digital interface between camera and processing unit is necessary. This International Standard has been established in order to define the use cases, the communication protocol, and the physical layer requirements of a video communication interface for cameras which covers the needs of driver assistance applications. The video communication interface for cameras — incorporates the needs of the whole life cycle of an automotive grade digital camera, — utilizes existing standards to define a long-term stable state-of-art video communication interface for cameras usable for operating and diagnosis purpose, — can be easily adapted to new physical data link layers

Scope: This International Standard describes the general use cases and communication scenarios, for a video communication interface for cameras used in video-based driver assistant systems. This part of ISO 17215 gives an overview of the structure and the partitioning of this International Standard and shows the relation between the different parts (see Figure 1). Part 1 Part 2 Part 3 Part 4 out of scope Ethernet physical layer Ethernet MAC + VLAN (802.1Q) IPv6 / IPv4 TCP UDP DoIP TFTP SOME / IP DHCP * API API Use cases IEEE 1722 (AVTP) part of AVB AV-transport IEEE 802.1AS (gPTP) part of AVB time sync Service discovery Service control Flash update Helper protocols L1 L2 L3 L4 L5 L6 L7 ICMPv6 ICMP NDP ARP OSI-layer Figure 1 — Overview of ISO 17215 This part of ISO 17215 serves as communication infrastructure for driver assistant applications that could be — presenting video images to the driver, — presenting warnings to the driver (e.g. using an HMI), or — interacting with the vehicle (e.g. emergency breaking). The terminology defined in this part of ISO 17215 is common for all video communication interfaces for cameras communication systems and is used throughout all parts of this International Standard. © ISO 2014 – All rights reserved

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17215-1-2014 PDF

ISO 17215-1-2014 PDF

$48.00 $96.00