Biocombustibles solides - Classes et spécifications des combustibles - Partie 5: Classes de bois de chauffage
Introduction: The objective of the ISO 17225 series is to provide unambiguous and clear classification principles for solid biofuels, to serve as a tool to enable efficient trading of biofuels, to enable good understanding between seller and buyer and as a tool for communication with equipment manufacturers. It also facilitates authority permission, procedures and reporting. This document supports the use of graded firewood for residential, small commercial and public building applications which require classified firewood quality. Residential, small commercial and public building appliances require higher quality fuel for the following reasons: — small-scale equipment does not usually have advanced controls and flue gas cleaning; — appliances are not generally managed by professional heating engineers; — appliances are often located in residential and populated districts. NOTE 1 Firewood produced according to this document can be used in stoves, fireplaces, cookers, room heaters and multifired sauna stoves, which are tested according to European standards EN 13229,[1]EN 12815,[2]EN 12809,[3] EN 13240,[4]EN 15250,[5]EN 15821,[6]EN 16510–2–1,[7]EN 16510–2–2,[8]EN 16510–2–3,[9]EN 16510–2–5,[10]EN 16510– 2–7,[11]EN 16510–2–10,[12] and boilers systems tested according to EN 303–5,[13]EN 16510–2–4.[14] NOTE 2 For individual contracts, ISO 17225-1 can be used. Although this document can be used separately, it requires a general understanding of the standards based on and supporting ISO 17225-1.
Scope: This document specifies the fuel quality classes and specifications of graded firewood. This document applies only to firewood produced from the following raw materials (see ISO 17225-1:2021, Table 1): — 1.1.1 Whole trees without roots; — 1.1.3 Stemwood; — 1.1.4 Logging residues (thick branches, tops, etc.); — 1.2.1 Chemically untreated by-products and residues from wood processing industry.