ISO 17325-1-2014 PDF

ISO 17325-1-2014 PDF

Ships and marine technology - Marine environment protection - Oil booms - Part 1: Design requirements

$71.50 $143.00 -50%
Product Code: ISO 17325-1
Stock In Stock
Edition: 1ST
Published: 06/15/2014
Number of Pages: 20
File Size: 1 file, 462 Bytes

Available Options

Product Description

Ships and marine technology - Marine environment protection - Oil booms - Part 1: Design requirements

Introduction: Oil booms can be classified in two major types: — fence booms typically provide a stiffened barrier designed to float vertically in the water; and — curtain booms are provided with flexible material for the underwater portion of the membrane (called the skirt). There are other types of booms, such as special purpose booms and sorbent booms, which are not the subject of this part of the International Standard. All parts of ISO 17325 will give some general guidelines for manufacturers as well as users with regard to subjects associated with producing, purchasing, and using such types of equipment. It will not define any specific type and size of boom for a particular application, as many variables have to be taken into consideration. This part of ISO 17325 specifies the basic design requirements, general function, designations and marking of oil booms. It further specifies minimum information regarding design, dimensions and materials of oil booms to be provided by the manufacturer. This International Standard has been developed after considering the below standards and national legislative requirements. The American Society for Testing and Materials (ASTM) Committee F-20 has prepared two standards relating to boom connectors. ASTM F1093 specifies static laboratory tests of the strength of an oil spill response boom under tensile loading. ASTM F1523 provides a guide on the selection of a containment boom that may be used to control spills of oil and other substances that float

Scope: This part of ISO 17325 specifies the basic design requirements, general function, designations and marking of oil booms. It further specifies minimum information regarding design, dimensions and materials of oil booms to be provided by the manufacturer. The intent of this International Standard is to assist manufacturers and facilitate user selection of booms by technical criteria. It does not purport to address all aspects of booms or safety concerns associated with boom use, nor does it define boom operational procedures. It is the responsibility of the user of this International Standard to establish the appropriate safety and health practices, and determine applicability of regulatory limitations.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17325-1-2014 PDF

ISO 17325-1-2014 PDF

$71.50 $143.00