Ships and marine technology - Metal valves for use in flanged pipe - Face-to-face and centre-to-face dimensions
Introduction: This International Standard establishes face-to-face and centre-to-face dimensions for metal marine valves to permit a degree of dimensional interchangeability in ships and marine piping. It is intended for use in selecting valves in piping for ships and marine services. This International Standard specifies face-to-face and centre-to-face dimensions of valves for ships and marine services including supplementary series of special valves under Standards for ships, other than those specified in ISO 5752:1982 for variety of types and series of general industrial valves. The tables of face-to-face dimensions in this International Standard and those specified in ISO 5752:1982 represent a considerable rationalization of international practices for metallic valves to be used worldwide in the shipbuilding and marine services. The pressure/temperature ratings for the different types of valves are those to be specified in the valve product standards for the types of valve and materials used. © ISO 2014 – All rights reserved
Scope: This International Standard specifies the basic series of face-to-face or centre-to-face dimensions for two-way metal valves used in flanged pipe systems for ship and marine services. Each series of face-to- face or centre-to-face dimensions can be used as required with flanges of mating dimensions conforming to ISO 7005-1, ISO 7005-2, and ISO 7005-3 or other national standards. The range of pressure ratings, in “K” values, is 5 - 10 - 16 - 20 - 30 - 40 and those specified in ISO 5752. The range of nominal sizes, in “DN” or “A” values, is 15 - 20 - 25 - 32 - 40 - 50 - 65 - 80 - 100 - 125 - 150 - 200 - 250 - 300 - 350 - 400 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 - 900 - 1 000 - 1 200. NOTE For information, pressure ratings at room temperature (cold ratings up to 120 °C) of K-series flanges are approximately as follows. Pressure class 5K 10K 16K 20K 30K 40K Pressure rating (RT) 0,7 MPa 1,4 MPa 2,2 MPa 3,4 MPa 5,1 MPa 6,8 MPa Pressure rating can differ by valve materials, sizes, and types. Reference shall be made to relevant product standards. For details of pressure temperature ratings of K-series flanges, refer to JIS Standards in the bibliography of this International Standard. JIS F7300 specifies a comprehensive guide for selection of valves listed in Tables 1 to 5.