ISO 17634-2015 PDF

ISO 17634-2015 PDF

Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification

$96.50 $193.00 -50%
Product Code: ISO 17634
Stock In Stock
Edition: 2ND
Published: 08/01/2015
Number of Pages: 30
File Size: 1 file, 973 Bytes

Available Options

Product Description

Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification

Introduction: This International Standard provides a classification system for tubular cored electrodes in terms of chemical composition of the all-weld metal, type of electrode core, type of shielding gas, and welding position or in terms of the tensile properties, chemical composition of the all-weld metal, usability characteristics of the electrodes, shielding gas, and welding position. The ratio of proof to tensile strength of weld metal is generally higher than that of parent metal. Matching weld metal proof strength to parent metal proof strength will not necessarily ensure that the weld metal tensile strength matches that of the parent metal. Where the application requires matching tensile strength, therefore, selection of consumables is made by reference to column 4 of Table 2. Of note is that the mechanical properties of all-weld metal test specimens used to classify the tubular cored electrodes will vary from those obtained in production joints because of differences in welding procedure such as electrode size, width of weave, welding position, and parent metal composition. The classification according to system A is mainly based on EN 12071:1999. The classification according to system B is mainly based upon standards used around the Pacific Rim. © ISO 2015 – All rights reserved

Scope: This International Standard specifies requirements for classification of tubular cored electrodes used in the post-weld heat-treated condition for gas shielded metal arc welding of creep-resisting and low alloy elevated temperature steels. One tubular cored electrode can be tested and classified with different shielding gases. This International Standard is a combined specification providing for classification utilizing a system based upon the chemical composition of all-weld metal or utilizing a system based upon the tensile strength and the chemical composition of all-weld metal. 1) Paragraphs and tables which carry the suffix letter “A” are applicable only to tubular cored electrodes classified to the system based upon chemical composition with requirements for the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this International Standard. 2) Paragraphs and tables which carry the suffix letter “B” are applicable only to tubular cored electrodes classified to the system based upon the tensile strength and chemical composition of all- weld metal in accordance with this International Standard. 3) Paragraphs and tables which have neither the suffix letter “A” nor the suffix letter “B” are applicable to all tubular cored electrodes classified in accordance with this International Standard. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this International Standard, pulsed current is not used for determining the electrode classification.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 17634-2015 PDF

ISO 17634-2015 PDF

$96.50 $193.00