Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification
Introduction: The LIN protocol as proposed is an automotive focused low speed UART-based network (Universal Asynchronous Receiver Transmitter). Some of the key characteristics of the LIN protocol are signal-based communication, schedule table-based frame transfer, commander/responder communication with error detection, node configuration and diagnostic service communication. The LIN protocol is for low-cost automotive control applications as, for example, door module and air conditioning systems (see also history described in Annex B). It serves as a communication infrastructure for low-speed control applications in vehicles by providing the following: — signal-based communication to exchange information between applications in different nodes; — bit rate support from 1 kbit/s to 20 kbit/s; — deterministic schedule table-based frame communication; — network management that wakes up and puts the LIN cluster into sleep mode in a controlled manner; — status management that provides error handling and error signalling; — transport layer that allows large amount of data to be transmitted (such as diagnostic services); — specification of how to handle diagnostic services; — electrical physical layer specifications; — node description language describing properties of responder nodes; — network description file describing behaviour of communication; — application programming interface. The ISO 17987 series is based on the open systems interconnection (OSI) basic reference model as specified in IS
Scope: This document specifies the LIN protocol including the signal management, frame transfer, schedule table handling, task behaviour, status management, and commander and responder node. It contains also OSI layer 5 properties according to ISO 14229-7 UDSonLIN-based node configuration and identification services (SID: B016 to B816) belonging to the core protocol specification. A node (normally a commander node) that is connected to more than one LIN network is handled by higher layers (i.e. the application) not within the scope of this document.