Superfine woven wool fabric labelling - Requirements for Super S code definition
Introduction: This International Standard has been developed from a CEN Workshop Agreement, CWA 16336 published in September 2011,[3] which was itself based on the International Wool Textile Organization Fabric Labelling Code of Practice: Quality Definitions Relating to “Super S”.[7] The “Super S” classification for the fineness of wool in woven fabrics and garments goes back to the traditional English wool grading system as used by the trade in Bradford, England. The foundations of this system can be described as follows: a yarn, to be even and strong enough for weaving, must contain a certain minimum number of fibres in its cross section. Therefore, with coarse wool fibres it is possible to obtain only coarse yarns, while with the fine ones very thin yarns can be spun. This criterion is the basis of the wool fineness classification. If wool is classified as ‘’Super 120s”, for example, it means that 1 pound of fibre will produce 120 hanks of yarn, each of which is 560 yards long. With a coarser wool the yarn would be thicker and the number of hanks lower (for instance 80), with a still finer wool on the contrary the hanks would be more numerous (for instance 150). At the beginning of this century, the International Wool Textile Organization (IWTO) officially and precisely codified the fineness classes by fixing for each one of them a maximum limit in microns of mean fibre diameter. As wool is processed, the diameter of the original fibre used in producing a woven fabric may change due to
Scope: This International Standard defines the requirements of the “Super S” labelling code for finished woven fabric made from pure virgin wool and the test method to determine this.