Textiles - Quantitative chemical analysis - Part 27: Mixtures of cellulose fibres with certain other fibres (method using aluminium sulfate)
Introduction: There are several kinds of test methods to determine the composition of fibre mixtures which include manual separation, chemical and microscopical methods. Chemical methods (selective dissolution method) for the analysis of fibre composition are applicable to most of the textile products. The procedure of such test method is that a component is dissolved out by chemical solvents, and then the insoluble residue is weighed. Caution should be exercised in handling chemical solvents such as sulfuric acid (70 %), hydrochloric acid (20 %) and dimethylformamide, etc. These solvents are hazardous and not easy to handle. An alternative test method can be an eco-friendly and safer test method due to using non-hazardous chemicals. For the mixture of cellulose fibres and some other fibres, cellulose fibre is degraded through carbonization by a small amount of acid and heat treatment, and the residue remains without damage. Environmental condition and safety in the testing room can be improved by this test method. © ISO 2018 – All rights reserved
Scope: This document specifies a method, using aluminium sulfate, to determine the mass percentage of cellulose fibres, after removal of non-fibrous matter, in textiles made of mixtures of — cellulose fibres (natural or regenerated) with — polyester, polyamide, acrylic, wool and elastane fibres.