ISO 18408-2019 PDF

ISO 18408-2019 PDF

Simplified structural design for reinforced concrete wall buildings

$48.00 $96.00 -50%
Product Code: ISO 18408
Stock In Stock
Edition: 1ST
Published: 08/2019
Number of Pages: 68
File Size: 1 file, 6 Bytes

Available Options

Product Description

Simplified structural design for reinforced concrete wall buildings

Introduction: This document aims to provide rules for the design and construction of reinforced concrete (RC) wall structures. The design rules are based on the ratio of wall cross-sectional area to the floor area. Therefore, actions (loads) and simplified analysis procedures are included as well as minimum acceptable construction practice guidelines. Reinforced concrete wall buildings (WRC) consist of bearing walls, wall girders, slabs, footing girders and foundations. These buildings have excellent seismic performance and fire-resistance and are low- priced construction compared to frame structures. This type of structure is one of the most popular buildings for residential apartment houses in the world. Structural features of WRC buildings can be summarized as follows: — high seismic performance (according to the damage of the past earthquakes, the damage ratio of WRC structures is much smaller than that of other types of structures); — fire resistance (the performance is as good as that of RC buildings); — economical superiority (bearing walls are as thick as wall girders). Buildings designed according to this document will consequently: a) for moderate earthquake motions, not produce cracks on bearing walls. b) for extremely large earthquake motions, prevent from collapse and fall. The charactersitics of this document to achieve the above performances are as follows: 1) Prevention of shear cracks developing in bearing walls during moderate earthquake motions The shear stress intensity

Scope: This document applies to reinforced concrete building consisting of load bearing walls of reinforced concrete buildings [such buildings are called reinforced concrete box-shaped wall buildings and (RC wall building)] or to the part of RC wall building which uses both this and other types of structure. This document applies to RC wall building as follows: — RC wall building with 5 or fewer aboveground storeys; — eaves height of 16 m or less; — storey height on each storey of 3 m or less; — on the top storey, the storey height can be 3,3 m or less; — if the roof has a slope, the sum of the storey height of the top storey and the height from the eaves to the ridge of 4 m or less. Deep foundations, such as piles and caissons, and their pile footings and caps, are beyond the scope of this document, and are not covered by it.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18408-2019 PDF

ISO 18408-2019 PDF

$48.00 $96.00