Courroies transporteuses - Atmosphères d’essai et durées de conditionnement
Introduction: The conditioning of test pieces prior to testing is commonly accepted as an essential practice in most, but not necessarily all, methods of test. Its purpose is to provide a common ground base for the commencement of the test and to remove an unnecessary variable in the search for the optimum precision for the particular test. In order to meet these objectives, it is essential to standardize as many of the variables as possible. Conveyor belts, other than steel cord conveyor belts, contain a textile element. This can be highly hydrophobic or somewhat more hydrophilic. Similarly, the polymer layer or cover can be thermoplastic or subject to thermal ageing. Each of these factors can have a significant effect on the property of the conveyor belt. These factors need to be taken into account when making a decision as to whether conditioning is necessary and, if so, what the most appropriate conditions would be. The provisions given in ISO139,[1] ISO23529[2] and ISO2231[3] have been taken into account in the preparation of this document. © ISO 2024 – All rights reserved
Scope: This document specifies the temperature, humidity and time conditions used for the conditioning and testing of all types of conveyor belt, irrespective of whether they have plastics or rubber covers. It also specifies the requirements for the time interval to be observed between production and testing of conveyor belt test pieces. Special conditions applicable to a particular test or material or simulating a particular climatic environment are not included.