PPE ensembles for firefighters undertaking specific rescue activities - Part 1: General
Introduction: ISO 18639 series of standards specify requirements of personal protective equipment (PPE) specifically designed to protect firefighters from injury and/or loss of life while engaged in special rescue activities. This document specifies the organisational structure of the ISO 18639 series of standards (see Annex A) with common standard design for easier end user access (see Annex B for ISO 18639-3 onward) and the drafting structure to be used consistently in the individual standards within the ISO 18639 series. ISO/TS 11999-2 specifies design and performance requirements for the compatibility of the relevant parts of the ISO 18639 series when all or some of the items covered in these parts are worn together, thereby creating an ensemble standard. All items meet the general requirements for marking and manufacturer’s instructions detailed in this document, as well as the specific marking and manufacturer’s instructions of the respective parts. Under best practice health and safety procedures, prior to choosing any PPE, a risk assessment of the workplace is carried out. Where hazards are identified and cannot be removed from a work place, the items of PPE chosen to protect personnel need to be fit for their intended use. They need to protect personnel whilst allowing them to carry out the work required in their workplace without unduly increasing the risk. In environments where firefighters can be required to work, not only needs the PPE protect the firefighter whilst enabling t
Scope: ISO 18639 series of standards specify requirements of personal protective equipment (PPE) specifically designed to protect firefighters from injury and/or loss of life while engaged in specific rescue activities. ISO 18639 series provides the principles that govern the development of incident type and/or hazard specific minimum test methods including design and performance requirements for personal protective equipment (PPE) worn by firefighters and other rescue workers to reduce injury and/or the loss of life while engaged in rescue activities. To assist with selection based on a risk assessment (see Annex C), type of PPE, (if applicable) and performance levels, for different categories of protection are included. This document covers PPE for use in the rescue activities for road traffic crash (RTC) and urban search and rescue (USAR), but could also include other rescue activities depending on the risk assessment. It does not include PPE for use in high risk fire exposures. Similarly, this document does not include PPE to protect against chemical and biological hazards, except against short term and accidental exposures whilst engaged in rescue activities. This document describes the general structure of the ISO 18639 series, including each subsection, sets design and performance requirements for PPE and includes requirements for marking and manufacturer’s instructions.