ISO 18639-5-2018 PDF

ISO 18639-5-2018 PDF

PPE ensembles for firefighters undertaking specific rescue activities - Part 5: Helmet

$96.50 $193.00 -50%
Product Code: ISO 18639-5
Stock In Stock
Edition: 1ST
Published: 11/2018
Number of Pages: 26
File Size: 1 file, 1 Byte

Available Options

Product Description

PPE ensembles for firefighters undertaking specific rescue activities - Part 5: Helmet

Introduction: ISO 18639 is a series of standards for personal protective equipment (PPE) for firefighters when engaged in specific rescue activities. It is not possible to provide a standard for PPE to cover all of the diverse range of rescue scenarios that firefighters are likely to encounter so it is important that risk assessments be undertaken to determine if the PPE covered by the ISO 18639 series is suitable for its intended use and the expected exposure to hazards. For complete protection against exposures, the risk assessment should include protection of the whole body including the torso, arms and legs, head, face, hands and feet. For certain rescue activities, safety ropes and harnesses may be required. For certain rescue situations, special PPE for use in and on water may be required. In some cases, appropriate respiratory protection may also be identified as being necessary. The performance requirements in this document take account of accidental exposure to heat and flame, but do not cover PPE for firefighting. While this document takes account of accidental exposure to some common chemicals, it is not intended that PPE conforming to this document should be considered as providing chemical protection as a primary function. It does not cover PPE to protect against biological, electrical or radiation hazards. The risk assessment should determine whether PPE complying with this document or to the requirements of any other relevant standard is more suitable. Firefighters should be

Scope: This document provides the principles that govern the development of incident type and/or hazard specific test methods and minimum performance requirements for helmets for firefighters while engaged in specific rescue activities. Helmets related to specific rescue activities, such as road traffic crash (RTC) and urban search and rescue (USAR), are documented in individual subclauses of this document. NOTE Further guidance can be found in ISO 18639-1. The purpose of this document is to ensure that minimum performance requirements for incident type and/or hazard specific helmets are designated. This document covers general helmet design, the minimum performance level of the materials used and the methods of test for determining this performance level. It does not cover special helmets for use in other high risk situations such as firefighting. This document does not cover protection for the torso, arms, legs and feet or protection of the hands against other hazards, e.g. chemical, biological, radiation and electrical hazards, except for limited, accidental exposure to fire ground chemicals and contaminated blood or body fluids. Selection of the appropriate system of personal protective equipment, (PPE), including helmets, is dependent on carrying out an effective risk assessment which identifies the hazard to be faced, evaluates the likelihood of those hazards and provides the means of reducing or eliminating these hazards.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 18639-5-2018 PDF

ISO 18639-5-2018 PDF

$96.50 $193.00