Imaging materials — Methods for measuring indoor light stability of photographic prints — Part 3: LED lamp exposure
Introduction: The ISO 18937 series of test methods has been written for the determination of the indoor light stability of photographic prints. ISO 18937-3 is an addition to the series due to the increasing importance of LED lighting. This test method is important to the end users of LED lamps for various use cases: home, office, and commercial applications; and museum, gallery, archive, and other cultural heritage applications. In addition, manufacturers of printers and printing materials will be able to use this method to test and to improve their print materials, equipment, and processes. As a reference for LED testing of photographic prints, Annex A provides a summary of two published test studies. The type of light source specified for use in this document is an LED lamp with a relative spectral irradiance that conforms to one of the Tables 1 or 3 for the two groups of use cases. See Annexes B and C for descriptions and explanations of LED lighting technology, the ability of LED lights to render colours, and the metrics by which colour rendering are assessed. Phosphor-converted blue LED lamps represent the majority of LED lamps used for the general lighting use case. These lamps are relatively low in price, have high electrical efficiency, and many of them can provide high colour rendering with Ra of 90+. These LED lamps are available in a variety of correlated colour temperatures (CCT), and some of the lamps are tunable and may be set by the user to several CCT values. These choices
Scope: This document describes test methods for measuring the light stability of photographic prints when subjected to LED illumination sources under conditions that simulate indoor display. This document is applicable to all types of colour and monochrome photographic reflection prints. This document does not include test procedures for determining the effects of light exposure on the physical stability of images, supports or binder materials. NOTE 1 It is recognized that in some instances, physical degradation such as support embrittlement, image layer cracking, or delamination of an image layer from its support, rather than the stability of the image itself, will determine the useful life of a print material. NOTE 2 General guidance and requirements are given in ISO 18937-1. NOTE 3 Tables 1 and 3 of LED lamp relative spectral irradiance were created using spectra from phosphor- converted blue LED lamps. Other types of LED lamps that meet the criteria of Tables 1 and 3 are also in the scope of this document.