Imaging materials and prints — Abrasion resistance — Part 2: Rub testing of photographic prints
Introduction: This method belongs to a series of test methods for the evaluation of permanence and durability of image prints, which refers to the resistance of image prints to physical, mechanical, chemical and/ or environmental stresses in conditions of use. The permanence of the image under environmental stresses is tested by each stress factor individually: light (ISO 18937[10]), heat (ISO 18936[9]), ozone (ISO 18941[11]), and humidity (ISO 18946[12]). These stress factors are given by the ambient conditions, over which the user often has limited control. The exposure to mechanical and physical stress may often be controlled by the user, unless intense handling is integral to intended use. Tests for rubbing of prints resulting in abrasion or smearing of the image are handled in the series ISO 18947, scratch resistance is addressed in ISO 18922[7] (for film) and in the series ISO 18951 (all parts) (for reflection prints, currently under development), respectively, and durability tests to simulate accidental exposure to water or food spill is described ISO 18935[8]. The process of rubbing a surface may result in different types of degradation, e.g. abrasion, scuffing, smudging, and others. They may be observed as loss of colour intensity, scratches, changes in gloss, coloration of former uncoloured areas, (coloured) material transfer to a receptor and others. This document provides standardized requirements to evaluate and quantify the abrasion resistance of image prints in their various
Scope: This document specifies tests to determine the abrasion resistance of photographic images for typical use in indoor context that is characterized by mild abrasive conditions. Examples are flipping of pages in an album, careful manual handling of prints (stacking, shifting) or use of magnets for attachment to a board. Photographic images refer to individual prints or prints in albums, which can be produced by a wide range of printing technologies, including silver halide, electrophotography, inkjet, dye diffusion thermal transfer, commonly known as dye sublimation, and dye transfer processes. Photographic images require “photo-grade” media, including coated or surface treated print materials, which are prerequisite to obtain photographic quality with aforementioned printing technologies. Test procedures are limited to (quasi-) linear, reciprocal abrasion test devices. For other printing technologies (e.g. offset lithography and other photomechanical printing processes) or non-photo-grade media or other levels of rubbing representative of other application profiles, different test methods and/or device options may be considered (see ISO 18947-1). Heavy duty abrasive conditions, such as floor tiles, floor graphics, abrasive cleaning and vehicle graphics, are out of scope of this document.