Ships and marine technology - Measurement of changes in hull and propeller performance - Part 3: Alternative methods
Introduction: Hull and propeller performance refers to the relationship between the condition of a ship’s underwater hull and propeller and the power required to move the ship through water at a given speed. Measurements of changes in ship specific hull and propeller performance over time make it possible to indicate the impact of hull and propeller maintenance, repair and retrofit activities on the overall energy efficiency of the ship in question. The aim of this document is to prescribe practical methods for measuring changes in ship specific hull and propeller performance and to define a set of relevant performance indicators for hull and propeller maintenance, repair, retrofit activities. The methods are not intended for comparing the performance of ships of different types and sizes (including sister ships) nor to be used in a regulatory framework. This document consists of three parts. — ISO 19030-1 outlines general principles for how to measure changes in hull and propeller performance and defines a set of performance indicators for hull and propeller maintenance, repair and retrofit activities. — ISO 19030-2 defines the default method for measuring changes in hull and propeller performance and for calculating the performance indicators. It also provides guidance on the expected accuracy of each performance indicator. — ISO 19030-3 outlines alternatives to the default method. Some will result in lower overall accuracy but increase applicability of the standard. Others may result in
Scope: This document outlines alternatives to the default method. Some will result in lower overall accuracy but increase applicability of the standard. Others can result in same or higher overall accuracy but includes elements which are not yet broadly used in commercial shipping. The general principles outlined and performance indicators defined are applicable to all ship types driven by conventional fixed pitch propellers, where the objective is to compare the hull and propeller performance of the same ship to itself over time. This document presents alternatives to measurement parameters (primary and then secondary) in Clause 4, then alternatives to measurement procedures (including alternative reference and evaluation periods) in Clause 5, describes the calculation of performance indicators in Clause 6, and finally the estimation of performance indicator accuracy in Clause 7. The structure used duplicates the structure of ISO 19030-2 to facilitate cross-reference between the two documents. NOTE Support for additional configurations (e.g. variable pitch propellers) will, if justified, be included in later revisions of this document.