ISO 19085-12-2024 PDF

ISO 19085-12-2024 PDF

Woodworking machines-Safety-Part 12: Tenoning-profiling machines

$145.50 $291.00 -50%
Product Code: ISO 19085-12
Stock In Stock
Edition: 2.
Published: 11/2024
Number of Pages: 72
File Size: 1 file, 4 Bytes

Available Options

Product Description

Woodworking machines — Safety — Part 12: Tenoning-profiling machines

Introduction: The ISO 19085 series provides technical safety requirements for the design and construction of woodworking machinery, as well as for the content of the relevant instruction handbook. It concerns designers, manufacturers, suppliers and importers of the machines specified in the Scope. This document is a type-C standard as stated in ISO 12100:2010. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organisations, market surveillance etc.). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, e.g. for maintenance (small, medium and large enterprises); — consumers (in case of machinery intended for use by consumers). The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or type-B standard

Scope: 1.1 This document specifies the safety requirements and measures for manually loaded and unloaded — single-end tenoning machines with a manual feed sliding table, — single-end tenoning machines with a mechanical feed sliding table, — single-end tenoning-profiling machines with mechanical feed, — double-end tenoning-profiling machines with mechanical feed, also designed to be automatically either loaded or unloaded, or both, and — angular systems for tenoning and profiling with mechanical feed with maximum workpiece height capacity of 200 mm for single-end machines and 500 mm for double-end machines, capable of continuous production use, altogether referred to as “machines”. 1.2 This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. 1.3 The machines are designed to process in one pass one end or two sides, either opposite or perpendicular to each other, of workpieces made of a) solid wood, and b) materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2); and only the machines with mechanical feed, made of c) fibre-cement, d) rock wool and glass wool, e) gypsum, f) plasterboard, g) matrix engineered mineral boards, silicate boards and sulfate boards, h) composite materials with core consisting of polyurethane or mineral material laminated with light alloy, i) polymer-matrix composite materials and reinforced thermoplastic, thermoset and elastomeric materials, j) aluminium light alloy profiles, and k) composite boards made from the materials listed above. © ISO 2024 – All rights reserved ISO 19085-12:2024(en) 1.4 This document is also applicable to machines fitted with one or more of the following devices or additional working units, whose hazards have been dealt with: — sanding units; — fixed or movable workpiece support; — automatic tool changing; — automatic workpiece returner; — glass bead saw unit; — hinge recessing unit;

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19085-12-2024 PDF

ISO 19085-12-2024 PDF

$145.50 $291.00