ISO 19085-4-2024 PDF

ISO 19085-4-2024 PDF

Woodworking machines-Safety-Part 4: Vertical panel circular sawing machines

$113.50 $227.00 -50%
Product Code: ISO 19085-4
Stock In Stock
Edition: 2.
Published: 07/2024
Number of Pages: 42
File Size: 1 file, 1 Byte

Available Options

Product Description

Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines

Introduction: The ISO 19085 series provides technical safety requirements for the design and construction of woodworking machinery, as well as for the content of the relevant instruction handbook. It concerns designers, manufacturers, suppliers and importers of the machines specified in the Scope. This document is a type-C standard as defined in ISO 12100. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (e.g. regulators, accident prevention organisations, market surveillance). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, for example, for maintenance (small, medium and large enterprises); — consumers (in case of machinery intended for use by consumers). The above-mentioned stakeholder groups have been given the possibility to participate in the drafting process of this document. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or type-B stan

Scope: This document specifies the safety requirements and measures for manually loaded and unloaded vertical panel circular sawing machines (defined in 3.1) capable of continuous production use, with hand feed or integrated feed, hereinafter referred to also as “machines”. This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account. This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — an integrated feed device; — a device for scoring; — an angle cutting device; — a middle support device; — programmable end stops for parallel vertical cuts; — a device for grooving with a milling tool with a cutting width not exceeding 27 mm; — a panel pusher; — a panel lowering device; — stop devices for workpiece during horizontal cuts. The machines are designed for cutting panels consisting of: a) solid wood; b) material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2); c) composite materials with core consisting, for example, of polyurethane or mineral material laminated with light alloy; d) polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials; e) gypsum boards, gypsum bounded fibreboards; f) honeycomb aluminium boards; g) matrix engineered mineral boards, silicate boards; h) aluminium light alloy plates; i) composite boards made from the materials listed above. © ISO 2024 – All rights reserved ISO 19085-4:2024(en) This document does not apply to machines — with pressure beam and saw unit mounted behind the workpiece support, — where the guide rails on which the saw unit moves vertically are fixed on the machine frame and the horizontal cut can only be made by manually feeding the panel, — designed to cut in vertical direction only, — automatically performing two or more cutting cycles in sequence, — intende

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19085-4-2024 PDF

ISO 19085-4-2024 PDF

$113.50 $227.00