ISO 19087-2018 PDF

ISO 19087-2018 PDF

Workplace air - Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy

$113.50 $227.00 -50%
Product Code: ISO 19087
Stock In Stock
Edition: 1ST
Published: 07/2018
Number of Pages: 38
File Size: 1 file, 1 Byte

Available Options

Product Description

Workplace air - Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy

Introduction: Respirable crystalline silica (RCS) is a hazard to the health of workers in many industries through exposure by inhalation. Industrial hygienists and other public health professionals need to determine the effectiveness of measures taken to control workers’ exposure. The collection of samples of air during a work activity and then measuring the amount of respirable crystalline silica are often done to assess an individual’s exposure, their respiratory protection, or the effectiveness of controls. Fourier- Transform Infrared (FTIR) analysis of crystalline silica in a sample of respirable dust collected on a collection substrate is employed in many countries to measure and estimate exposure to RCS. FTIR is able to measure quartz and cristobalite. This document specifies the analysis procedures for the measurement of RCS through three methods: a) Direct-on-filter method: a method of analysing RCS directly on the air sample filter. A specific requirement of this method is that the sampler used for the workplace measurements is the same as that used for the preparation of calibration samples. b) Indirect method by redeposition: a method whereby the dust is recovered from the collection substrate and deposited onto a filter for analysis. c) Indirect method by potassium bromide (KBr) pellet: a method whereby the dust is recovered from the collection substrate and pressed into a potassium bromide (KBr) pellet for analysis. Many different types of sampling apparatus are used to collec

Scope: This document is a standard for the analysis by Fourier-Transform Infrared (FTIR) of respirable crystalline silica (RCS) in samples of air collected on collection substrates (i.e. filters or foams). Three analytical approaches are described for whom the dust from the sample collection substrate is a) analysed directly on sampled filter, b) recovered, treated and deposited onto another filter for analysis, or c) recovered, treated and pressed into a potassium bromide (KBr) pellet for analysis. This document provides information on the instrumental parameters, the sensitivity of different sampling apparatus, the use of different filters and sample treatment to remove interference. In this document the expression RCS includes the most common polymorphs quartz and cristobalite. This document excludes the less common polymorphs of crystalline silica, such as tridymite. Under certain circumstances (i.e. low filter dust loads, low silica content), the analytical approach described in this method cannot fulfil the expanded uncertainty requirements of ISO 20581. Guidance for calculation of uncertainty for measurements of RCS is given in ISO 24095.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19087-2018 PDF

ISO 19087-2018 PDF

$113.50 $227.00