Lubricants - Determination of tribological quantities for oils and greases - Tribological test in the translatory oscillation apparatus
Introduction: Liquid lubricants (oils) and consistent lubricants (greases) reduce friction and wear and/or prevent adhesive wear (scuffing, galling). In order to establish the tribological profile of a lubricant adequate tribometric, test methods are required. The test method described in this document can be regarded as an evaluation tool for the determination of the lubricant-related contribution to friction, wear, load carrying capacity and extreme pressure behaviour. This test method is dedicated to a translatory oscillation apparatus which is fully computer controlled. This test method harmonizes the following national test methods using the ball-on-disk contact geometry: a) DIN 51834-2[1] (oil, coefficient of friction and wear); b) ASTM D6425[2] (oil, coefficient of friction and wear); ASTM D7421[4] (oil, pass load/O.K. load); ASTM D5706[6] (grease, pass load/O.K. load); ASTM D5707[8] (grease, coefficient of friction and wear); c) SH/T 0721[9] (grease, coefficient of friction and wear); SH/T 0784[7] (grease, pass load/O.K. load); NB SH/T 0847[3] (oil, coefficient of friction and wear); NB/SH/T 0882[5] (oil, pass load/O.K. load). The harmonization is also related to the use of only one type of cleaning solvent. Users of this test method should determine whether the results obtained from this method correlate with field performance or other applications. It is the responsibility of the operator to ensure that all local legislative and statutory requirements are met. © ISO 2016 – All ri
Scope: This document describes test methods based on a high-frequency, linear-oscillation test machine to determine tribological quantities like friction, wear, load carrying capacity and extreme pressure behaviour of liquid lubricants (oils) and consistent lubricants (greases) in the ball-on-disk contact geometry. NOTE This method is technically equivalent to DIN 51834–2/ASTM D6425[1] (NB/SH/T 0847[3]) and ASTM D7421[4] (NB/SH/T 0882[5]) for oils, as well as ASTM D5706[6] (SH/T 0784[7]) and ASTM D5707[8] (SH/T 0721[9]) for greases.