ISO 19658-2025 PDF

ISO 19658-2025 PDF

Sludge recovery, recycling, treatment and disposal-Protocol for validating methods for physical properties of sludges

$31.50 $63.00 -50%
Product Code: ISO 19658
Stock In Stock
Edition: 1.
Published: 10/2025
Number of Pages: 14
File Size: 1 file, 1 Byte

Available Options

Product Description

Sludge recovery, recycling, treatment and disposal — Protocol for validating methods for physical properties of sludges

Introduction: To be published as an ISO document, all the methods for physical properties of sludges need to be validated through interlaboratory trials. Validation usually consists in analysing reference samples circulated to many laboratories in different countries and in evaluating the repeatability and reproducibility of measurements. — Repeatability is defined as the ability of a method to reproduce a measurement while being tested under an unchanging set of conditions. This does not imply that the obtained value is correct, but rather that it is the same every time. — Reproducibility is the same as repeatability, but for a specific set of conditions. It is therefore a more realistic indication of a method to reproduce a measurement, whenever a predefined set of conditions is recreated. However, for physical parameters, with the exception of calorific value, samples of “dried sludge” cannot be used for analysis, but only “fresh sludge” samples, with the consequence that many problems arise because: — the sludge physical characteristics change with time of storage, also considered that any preservation practice (e.g. freezing) can affect sludge properties; — the sludge physical characteristics are strongly affected by transport and handling; — fresh sludge requires particular precautions and authorization for transport by ordinary delivering systems. Therefore, “fresh sludge” samples need to be examined by laboratories close to wastewater or waterworks plants and analysed as soon as po

Scope: This document specifies procedures for validating the characterization methods for physical properties of sludge. The method applies to sludges and suspensions from: — storm water handling; — urban wastewater collecting systems; — urban wastewater treatment plants; — industrial wastewater that has been treated similarly to urban wastewater; — water supply plants. In accordance with ISO/TC 275 scope this document is applicable to sludge and products from urban wastewater collection systems, night soil, storm water handling, water supply treatment plants, wastewater treatment plants for urban and similar industrial waters. This document is applicable to all sludge that can have similar environmental and/or health impacts with exclusion of hazardous sludge from industry and dredged sludge.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19658-2025 PDF

ISO 19658-2025 PDF

$31.50 $63.00