ISO 19743-2026 PDF

ISO 19743-2026 PDF

Solid biofuels-Determination of content of heavy extraneous materials larger than 3,15 mm

$31.50 $63.00 -50%
Product Code: ISO 19743
Stock In Stock
Edition: 2.
Published: 01/2026
Number of Pages: 12
File Size: 1 file, 370 KB

Available Options

Product Description

Solid biofuels — Determination of content of heavy extraneous materials larger than 3,15 mm

Introduction: Determination of the content of heavy extraneous materials (HEM) larger than 3,15 mm is important when evaluating the suitability of using biomass as biofuel. The presences of heavy extraneous materials lowers the energetic value of the fuel and increases the residue after burning, thus increasing the costs of disposal. Stones and other impurities contained in biomass from stumps, roots, mill residue and harvest and landscape management residues can cause problems during size reduction, as well as during combustion. Impurities smaller than 3,15 mm are not considered as part of this testing method but can still contribute to the ash content. The contents of heavy extraneous materials larger than 3,15 mm are not part of the ash content. NOTE There are three main sources of heavy extraneous materials: — they can be contained in the base material from which the biofuel (e.g. hog fuel) is produced; — they can unintentionally be added to the fuel while loading from the ground, by digging too low; — they can be residues from former loads in the transport vehicle. The last two categories of heavy extraneous materials mentioned in the NOTE cannot be determined by the method described in this document, because it is unlikely that the incidental impurities can be found in the random sample on which this method is based. If such incidental impurities are found during visual inspection of the delivered fuel, then this can be documented by pictures and contact can be sought with the suppli

Scope: This document specifies a method for the determination of the content of heavy extraneous materials (HEM) larger than 3,15 mm by the use of sink-and-float separation combined with elutriation. This document is applicable to woody biomass in accordance with ISO 17225-1, and especially for hogfuel in accordance with ISO 17225-9. NOTE 1 This method is designed to determine the level of impurities larger than 3,15 mm with a specific density >1 g/cm3, such as stones, glass, rubber, metal and certain types of plastics. NOTE 2 During the processing of the sample, hand sorting of light impurities with a specific density ≤1 g/cm3 (e.g. plastic foil) can also be done. NOTE 3 Some heavy extraneous materials (e.g. lumps of clay) can fall apart when submerged in water. NOTE 4 Heavy extraneous materials smaller than 3,15 mm can damage milling equipment, when reducing the material in size to produce laboratory samples.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19743-2026 PDF

ISO 19743-2026 PDF

$31.50 $63.00