ISO 19901-4-2025 PDF

ISO 19901-4-2025 PDF

Oil and gas industries including lower carbon energy-Specific requirements for offshore structures-Part 4: Geotechnical design considerations

$162.00 $324.00 -50%
Product Code: ISO 19901-4
Stock In Stock
Edition: 3.
Published: 02/2025
Number of Pages: 236
File Size: 1 file, 19 Bytes

Available Options

Product Description

Oil and gas industries including lower carbon energy — Specific requirements for offshore structures — Part 4: Geotechnical design considerations

Introduction: The International Standards on offshore structures prepared by TC 67 (i.e. ISO 19900, the ISO 19901 series, ISO 19902, ISO 19903, ISO 19904-1, the ISO 19905 series, ISO 19906) constitute a common basis covering those aspects that address design requirements and assessments of all offshore structures used by the oil and gas industries worldwide. Through their application, the intention is to achieve reliability levels appropriate for offshore structures, whatever the type of structure and the nature of the materials used. Application specific requirements for different energy industries are given in the relevant standards. For example, for the offshore wind industry, IEC 61400-1 and IEC 61400-3-1 outline the design requirements (e.g. return periods) for offshore wind turbine support structures. This document may be applied for the design of foundations used in the offshore wind industry. In this case, it should be verified that the type and dimension of the foundation, as well as the type of actions acting upon it, are consistent with those used in the development of the design methods. For example, the pile design methods of Clauses 8 are not necessarily applicable to the design of monopiles for which L/D is less than 10 and their validity for such cases should be assessed. Offshore wind structures can also have other requirements, such as a characterisation of foundation stiffness, that are beyond the scope of this document. Reference should be made to the overarching applic

Scope: This document contains provisions for geotechnical engineering design that are applicable to a broad range of offshore structures, rather than to a particular structure type. This document outlines methods developed for the design of shallow foundations with an embedded length (L) to diameter (D) ratio L/D < 0,5, intermediate foundations, which typically have 0,5 ≤ L/D ≤ 10 (see Clause 7), and long and flexible pile foundations with L/D > 10 (see Clauses 8 and 9). This document also provides guidance on soil-structure interaction aspects for flowlines, risers and conductors (see Clause 10) and anchors for floating facilities (see Clause 11). This document contains brief guidance on site and soil characterization, and identification of hazards (see Clause 6). This document can be applied for foundation design for offshore structures used in the lower carbon energy industry.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19901-4-2025 PDF

ISO 19901-4-2025 PDF

$162.00 $324.00