ISO/IEC 15961-3.2-2019 PDF

ISO/IEC 15961-3.2-2019 PDF

Information technology - Data protocol for radio frequency identification (RFID) for item management - Part 3: RFID data constructs

$71.50 $143.00 -50%
Product Code: ISO/IEC 15961-3.2
Stock In Stock
Edition: 1ST
Published: 02/2019
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Information technology - Data protocol for radio frequency identification (RFID) for item management - Part 3: RFID data constructs

Introduction: The technology of radio frequency identification (RFID) is based on non-contact electronic communication across an air interface. The structure of the bits stored on the memory of the RFID tag is invisible and accessible between the RFID tag and the interrogator only by the use of the appropriate air interface protocol, as specified in the appropriate part of ISO/IEC 18000. The transfer of data between the application and the interrogator in open systems requires data to be presented in a consistent manner on any RFID tag that is part of that open system. Application commands from the application and responses from the interrogator also require being processed in a standard way. This is not only to allow equipment to be interoperable, but in the special case of the data carrier, for the data to be encoded on the RFID tag in one system implementation for it to be read at a later time in a completely different and unknown system implementation. The data bits stored on each RFID tag must be formatted in such a way as to be reliably read at the point of use if the RFID tag is to fulfil its basic objective. Manufacturers of RFID equipment (interrogators, RFID tags, etc.) and the users of RFID technology require a standard-based data protocol for RFID for item management. ISO/IEC 15961 and ISO/ IEC 15962 specify this data protocol, which is independent of any of the air interface standards defined in ISO/IEC 18000. As such, the data protocol is a consistent component in the RFID sy

Scope: This document specifies rules and code structures associated with the data constructs for RFID for item management. In particular, it: — defines the application family identifier (AFI), including the range of code values that are available to use for RFID for item management; — defines the data format, including the range of code values that are available to use for RFID for item management; — describes the Object Identifier structure used for RFID for item management; — specifies the function of the Object Identifier for the Unique Item Identifier (UII); — specifies the function of the Object Identifier for other item attendant data. NOTE Conventionally in International Standards, long numbers are separated by a space character as a “thousands separator”. This convention has not been followed in this document because the arcs of an Object Identifier are defined by a space separator (according to ISO/IEC 8824 and ISO/IEC 8825). As the correct representation of these arcs is vital to this document, all numeric values have no space separators except to denote a node between two arcs of an Object Identifier. For additional clarity, Object Identifiers are presented in bold text.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC 15961-3.2-2019 PDF

ISO/IEC 15961-3.2-2019 PDF

$71.50 $143.00