Information technology — 3D printing and scanning — Assessment methods of 3D scanned data use in 3D printing
Introduction: This document was developed in response to the need for quality management of 3D printing and scanning technology through the use of information and communication technology (ICT). 3D scanning is the process of scanning a real-world object or environment to collect data on its shape and possibly its style attributes. The main purpose of 3D scanning is for generating high-precision digital 3D models. A 3D scanner can be based on many different technologies, each with its own purposes and targets, limitations, and advantages. There could be many limitations in each type of target object that will be digitized. For example, optical technology often encounters many difficulties with dark, shiny, reflective, or transparent objects. Another example, as for computed tomography scanning, structured-light 3D scanners, and LiDAR technology, the generation of digital 3D models requires the use of non-destructive internal scanning technology. Despite the rapid growth of 3D scanning applications, the accuracy, precision and reproducibility of generated 3D models from 3D scanned data have not been thoroughly investigated. Especially if 3D scanned data are used for 3D printing, their accuracy and precision are critical. Inaccuracies can arise due to errors that occur during the imaging, segmentation, postprocessing, and 3D printing steps. The total accuracy, precision, and reproducibility of 3D printed models are affected by the sum of errors introduced in each step involved in the creation
Scope: This document specifies methods and metrics for assessing the accuracy and precision of 3D scanned data for use in 3D printing, throughout the full 3D printing lifecycle. This document focuses mainly on 3D scanned data from computed tomography. Computed tomography can acquire information concerning the internal structures, regional density, orientation and/or alignment of scanning objects, as well as their shape and appearance. This document is applicable to the assessment of image-based modelling, segmentation, and 3D models. This document is not intended to assess the 3D printed product itself.