Information technology — Digitally recorded media for information interchange and storage — Test method for the estimation of lifetime of optical disks for long-term data storage
Introduction: Markets and industry have developed a common understanding that the property referred to as the lifetime of data recorded to optical disks plays an increasingly important role in many applications. Disparate standardized test methodologies exist for Magneto-Optical disks versus recordable compact disks and DVD systems. The first edition of this document provided a common methodology applicable for various purposes that included lifetime testing of then available writable CD and DVD optical disks. ISO/IEC JTC 1/SC 23/JWG 1, which is a joint working group comprising ISO/TC 42, ISO/TC 171/SC 1 and ISO/IEC JTC 1/SC 23, initiated work on this subject and developed initial drafts with assistance from Ecma International TC 31. After the issuance of the first edition of this document, ISO/IEC standards for the physical formats of BD Recordable and Rewritable disks were published. Accordingly, ISO/IEC JTC 1/SC 23/JWG 1 started work again to include testing of writable BD optical disks in the second edition of this document. Additional details for lifetime estimation are also incorporated. The third edition was issued as a minor enhancement of this document. It is clarified that the stress condition and the disk testing location are independent each other and the cross-combinations of them are applicable. vi © ISO/IEC 2017 – All rights reserved
Scope: This document specifies an accelerated ageing test method for estimating the lifetime of the retrievability of information stored on recordable or rewritable optical disks. The method is based on the theoretical assumption that the lifetime of data recorded on an optical disk has a lognormal distribution. Detailed testing is specified for the following formats: DVD-R/RW/RAM disks, +R/+RW disks, CD-R/ RW disks and BD recordable/rewritable disks. The testing can be applied to additional optical-disk formats with substitution of the appropriate specifications and can also be updated by the committee in the future as required. This document includes: — stress conditions: — Basic and Rigorous stress-conditions for testing and subsequent analysis using both the Eyring and Arrhenius methods; — ambient storage conditions in which the lifetime of data stored on optical disk is estimated: — a Controlled storage-condition, Temp = 25 °C and RH = 50 %, representing full-time air conditioning. The Eyring method is used to estimate the lifetime under this storage condition; — a Harsh storage-condition, Temp = 30 °C and RH = 80 %, representing the most severe conditions in which users handle and store optical disks. The Arrhenius method is used to estimate the lifetime under this storage condition; — a description of the evaluation system; — procedures for specimen preparation and data acquisition; — definitions and methods used in testing specific disk types; — analysis of test results to determine the lifetime of stored data; — a format for reporting the estimated lifetime of stored data. The methodology includes only the effects of temperature and relative humidity. It does not attempt to model degradation due to complex failure mechanism kinetics, nor does it test for exposure to light, corrosive gases, contaminants, handling, or variations in playback subsystems. Disks exposed to these additional sources of stress or higher levels of temperature and relative humidity are expected to experience shorter usable lifetime.