Information technology — Office equipment — Method for the determination of ink cartridge yield for colour inkjet printers and multifunction devices that contain printer components
Introduction: The purpose of this document is to provide a process for determining the ink cartridge yield for a given colour inkjet print system (i.e. integrated ink cartridges and ink cartridges without integrated printheads) using a standard consumer type test page suite. In the case where a cartridge set can be used in multiple printer models, only one yield test needs to be performed as long as the difference between printer models does not impact yield. NOTE A cartridge supplier can choose to use more than one market identifier for a single physical cartridge. In this case, only one yield test is required as long as there are no differences in the cartridges other than market identifiers. This document prescribes the following: — the test method that manufacturers, test laboratories, etc. use to determine ink cartridge yield; — the method for determination of declared yield values from the test results; — the appropriate method of describing the yield of cartridges in documentation supplied to the consumer by the manufacturer. The cartridge yield is determined by an end-of-life judgement, or signalled with either of two phenomena: fade, caused by depletion of ink in the cartridge, or automatic printing stop, caused by an ink out detection function. It is envisioned that one of the uses of this document is for the calculation of cost per page (CPP). While this document measures a portion of this cost, it is not used as the sole component of CPP calculation. Additional factors are cons
Scope: The scope of this document is limited to the evaluation of ink cartridge page yield for ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated printheads) for colour inkjet print systems. This document can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain inkjet printer components. Both liquid and solid ink products can be tested using this document. This document is only intended for the measurement of ink cartridge page yield when printing on plain paper. No other claims can be made from this testing regarding quality, reliability, etc. This document can be used to measure the yield of any cartridge that is used in a significant amount during the printing of the test page suite defined in ISO/IEC 24712. This document is not for use with printers whose minimum printable size is equal to or greater than A3 or for printers designed or configured to print photos (for example, maximum printable size less than A4 or a printer configuration intended for photo-only printing). In addition, it only applies to drop-on- demand printing systems. NOTE Integrated ink cartridges is a cartridge that includes at least: an ink containment part, an ink deposition mechanism and an ink transport part (see ISO/IEC 29142-1).