Automatic identification and data capture techniques — Bar code symbol quality test specification — Direct part mark (DPM)
Introduction: Direct part marking (DPM) is a technology whereby, generally, an item is physically altered to produce two different surface conditions. This alteration can be accomplished by various means including, but not limited to, dot peen, laser mark, ink jetting and electro-chemical etch. The area of the alteration is called "the mark." The area that includes the mark and background as a whole, when containing a pattern defined by a bar code symbology specification, is called "a symbol." When light illuminates a symbol, it reflects differently depending on whether it impinges on the background of the part or on the physical alteration. In most non-DPM bar code scanning environments, light is reflected off a smooth surface that has been coloured to produce two different diffuse reflected states. The DPM environment generally does not fit this model because the two different reflected states depend on at least one of the states having material oriented to the lighting such that the angle of incidence is equal to the angle of reflection. Sometimes, the material so oriented produces a specular (mirror like) reflectance that results in a signal that is orders of magnitude greater than the signal from diffuse reflectance. In addition, from the scanner point-of-view, some marking and printing methods generate dots and are not capable of producing smooth lines. This is important for symbologies such as Data Matrix, which is specified to contain smooth continuous lines, but can be marked with
Scope: This document describes the modifications to the symbol quality methodology defined in ISO/IEC 15415 and provides a symbology specification. This document establishes alternative illumination conditions, some new terms and parameters, modifications to the measurement and subsequent grading of certain parameters, and the reporting of the grading results. This document is intended for verifier manufacturers and application specification developers.