ISO/IEC 7811-9-2015 PDF

ISO/IEC 7811-9-2015 PDF

Identification cards - Recording technique - Part 9: Tactile identifier mark

$31.50 $63.00 -50%
Product Code: ISO/IEC 7811-9
Stock In Stock
Edition: 2ND
Published: 12/01/2015
Number of Pages: 8
File Size: 1 file, 297 Bytes

Available Options

Product Description

Identification cards - Recording technique - Part 9: Tactile identifier mark

Scope: This part of ISO/IEC 7811 specifies the physical characteristics of a tactile identifier mark used by visually impaired card holders to distinguish their cards. It defines the area on the card for the TIM and the layout of Braille style embossed dots arranged in patterns to enable easy tactile recognition. 2 Conformance A TIM is in conformance with this part of ISO/IEC 7811 if it meets all mandatory requirements and optional requirements as specified. 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 7810 and the following apply. 3.1 TIM tactile identifier mark 3.2 embossed raised in relief from the front surface of the card by adding or reacting card material or by deforming the card material from the opposite side 4 TIM physical characteristics 4.1 Location of TIM The TIM should be located on the front surface of the card in the area shown in Figure 1. The TIM shall not be located outside the name and address area defined by ISO/IEC 7811-1. Regardless of TIM location, all other raised areas shall be at least 1 mm from the edge of any TIM. When the technology used to form the raised areas causes a physical deformation of the card such as mechanical embossing, then special care shall be taken that such deformation of the card does not adversely affect the required characteristics of the contained components such as IC, antenna, connecting wires, etc. A minimum distance of 3 mm between the contained components and any deformed part of the card is recommended unless it is known that the components are not affected by the deformation of the card. © ISO/IEC 2015 – All rights reserved

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC 7811-9-2015 PDF

ISO/IEC 7811-9-2015 PDF

$31.50 $63.00